How do I replace the batteries in my SPOT Trace?
Author:SPOT Web Team Article Reference #:AA-00506 Views:5975 Date Added:2013-11-12 01:46 AM Last Updated:2013-11-12 01:46 AM 4.25 Rating/ 17 Voters

Follow these steps to replace the batteries in your Trace:

  1. Loosen the screws to open the back cover.
  2. Install 4 AAA EnergizerTM Ultimate Lithium 8x batteries or NiMH rechargeable batteries.
  3. Replace cover ensuring that the gasket is lined up and free of debris. Tighten screws with a small screwdriver. It is important that you fully tighten the back cover to maintain SPOT TRACE's waterproof seal.
  4. Keep your batteries installed, even when using line power, to ensure proper system performance in the event line power is cut or should fail.

Please Note: NiMH batteries cannot be charged within the SPOT TRACE unit using line power, and SPOT Trace is NOT waterproof while line powered unless using the custom USB cable (sold separately)

Quick Jump
Print Print Article
Info Tell your opinion about this article